Recent Posts

Pages: [1] 2 3 ... 6
1
AD 480 Reverb / Re: Hi. Need Some Help
« Last post by Thomas Fiedler on November 29, 2015, 06:50:20 PM »
Hi Radix,

thanks for the info. Yes i know about this. A solution is on the way.

Cheers,

Thoams
2
AD 480 Reverb / Re: Hi. Need Some Help
« Last post by Radix on November 29, 2015, 02:13:50 PM »
Hi Thomas

Thank you for getting back to me. I tried it yesterday morning and all of sudden I could hear the presets in real-time. Can't figure out why I couldn't before! Anyway thank you very much. Stay tuned I might have more questions. :)

P.S. When I surf around your site I quite frequently get this:



Just thought you might be interested.
3
AD 480 Reverb / Re: Hi. Need Some Help
« Last post by Thomas Fiedler on November 28, 2015, 10:21:29 AM »
Hi Radix,

thank you for purchasing the AD 480 pro.

Actually your file should play just fine through the reverb in realtime and you should be able to jump through the presets. Please make shure that the mix slider is not at 0 or a very low value and that both in bypass and out bypass are off. On the setup page it is possible to route mixed, dry and wet signal to the available outputs. If you never changed something there you should be fine but please check there also if something is not right.

If the problem still persists please tell me which iDevice you are using, on which iOS version you are and which audio interface you use in case you do use one.

Best,

Thomas
4
AD 480 Reverb / Hi. Need Some Help
« Last post by Radix on November 27, 2015, 04:36:05 PM »
I just purchased your AD 480 Pro Reverb & I'm having a little bit of trouble. I play acoustic guitar & I was looking for a good reverb to enhance my recordings. I know next to nothing about recording & DAW's etc. What I want to do is very simple. I just want to add reverb to a dry audio file. When I import a file into the AD 480 I play it but can't hear what the different pre-sets sound like until I export it & process it. How can I just listen to the file & scroll through the pre-sets hearing what they sound like until I find one I like & then export & process it.

Thanks for your time.
5
AD 480 Reverb / Re: 480 free keeps banner notification up
« Last post by Thomas Fiedler on February 04, 2015, 09:12:25 AM »
Glad I could help.  :)
6
AD 480 Reverb / Re: 480 free keeps banner notification up
« Last post by Fishoow on February 04, 2015, 03:42:41 AM »
Yes, indeed the red banner. Thank you for helping me with something I had sitting far back in my mind which was for a while. I took it for granted that all programs just slept in the background until you wanted them. I did not know that you could kill them. It's been a year that I've had this phone.
What confused me slightly is that Audiobus will keep the red banner up and keep other apps running even through a screen time-out until you unload all instruments and routings. Then, upon closing (apparently sending to the background) the banner will go away. When the banner didn't go away for the 480 I assume something was wrong.
Thanks for fixing two problems and I can't wait to include this app into the music I make every day at my work. The app truly does fix a transitioning issue I had between presets in Camel Audio Alchemy.

Cheers

JStuart
7
AD 480 Reverb / Re: 480 free keeps banner notification up
« Last post by Thomas Fiedler on January 26, 2015, 10:56:18 PM »
Hi Fishoow,

if you are talking about the red banner on the top of the screen which says that the AD 480 is recording, do not worry about this. When an app has access to the iDevices recording facility, which could be the internal mic or an input of an audio interface, this red banner is shown by iOS in case the app has primary access to the audio system. If the app is in background and no audio is processed it does not use up more resources than any other app in the background. Generally it is recommended to terminate (not just send to background) any app not in use.

So the behaviour is standard for audio recording enabled apps. Nothing to worry.

Cheers

Thomas
8
AD 480 Reverb / 480 free keeps banner notification up
« Last post by Fishoow on January 22, 2015, 02:38:55 AM »
Hello,

I downloaded AD480 free and liked it. Downloaded standard trial and LOVED it (thought it was brilliant) and would buy it but it keeps a banner notification at the top of my iPhone5s. I assume this means it's always running and taking up resources. If this was fixed I would purchase. It fixes a problem I had switching between presets in Alchemy (RIP).
Is this fixable? Anyone else have this problem?
9
AD 480 Reverb / Re: The last Update
« Last post by Thomas Fiedler on September 15, 2014, 09:49:35 PM »
 8)

My pleasure, friend.
10
AD 480 Reverb / The last Update
« Last post by Jus on September 15, 2014, 08:38:17 PM »
 8)  thank you so much it is working great with Auria so far it's bullet proof  8)
I'm a really happy bunny I can now use the ad480 every time now I need it In the IAA slot and not just for special occasions where I need to remember to take it out before closing down Auria etc
  :)  :)  :) 
  Thanks for all your hard work cheers  8)
Pages: [1] 2 3 ... 6